User Manual

ATM Digital Video Recorder User Manual
167
11.4 Serial Port Protocol
Before you start
Connect the device and the ATM (Automatic Teller Machine) via the serial port properly.
Purpose
The transaction information, including transaction card No, transaction amount, transaction
behaviour, etc., will be sent from the ATM to the device.
Step 1 Enter the ATM Settings interface.
Menu > Configuration > ATM
Figure 11-7 ATM Settings-Serial Port Protocol
Step 2 Select the ATM from the drop-down list.
Step 3 Check the checkbox of Enable ATM.
Step 4 Select Serial Port Protocol from the drop-down list as the input mode.
Step 5 Configure the serial port protocol settings.
1) Click Setting to enter the Serial Port Protocol Settings interface.
2) Set the baud rate, data bit, stop bit, parity, flow ctrl and usage for the serial port
communication.
3) Click OK to save the settings and exit.
The serial port parameters you set on the device should be corresponding with that of the
connected ATM and the serial port usage should be set as Transparent Channel.