User Manual

ATM Digital Video Recorder User Manual
166
Step 1 Enter the ATM Settings interface.
Menu > Configuration > ATM
Figure 11-5 ATM Settings-Network Protocol
Step 2 Select the ATM from the drop-down list.
Step 3 Check the checkbox of Enable ATM.
Step 4 Select Network Protocol from the drop-down list as the input mode.
Step 5 Configure the network protocol settings.
1) Click Setting to enter the Network Protocol Settings interface.
2) Set the Interception Port for the network communication.
3) Click OK to save the settings and exit.
The interception port is 10000 by default.
Figure 11-6 Network Protocol Settings
Step 6 Select the protocol from the drop-down list for the network communication.
2 types of protocols are selectable: HIKVISION and ICBC.
Step 7 Click Apply and reboot the device to activate the new settings.