User Manual

ATM Digital Video Recorder User Manual
161
Figure 10-26 Packet Export Attention
Up to 1M data can be exported each time.
10.3.4 Checking Network Status
Purpose
You can also check the network status and quick set the network parameters in this interface.
Step 1 Enter the Network Traffic interface.
Menu > Maintenance > Net Detect
Step 2 Click the Network Detection tab to enter the Network Detection interface.
Step 3 Click Status on the right bottom of the interface.
Figure 10-27 Checking Network Status
If the network is normal the following message box pops out.
Figure 10-28 Network Status Checking Result
If the message box pops out with other information instead of this one, you can click
Network button to show the quick setting interface of the network parameters.