User Manual

ATM Digital Video Recorder User Manual
157
Step 5 There will be the certificate information after you successfully create and install the
certificate.
Figure 10-20 Installed Certificate Property
Step 6 Check the checkbox to enable the HTTPS function.
Step 7 Click the Save button to save the settings.
10.2.7 Configuring Email
Purpose
The system can be configured to send an Email notification to all designated users if an event is
detected, e.g. an alarm or motion event is detected, etc.
Before configuring the Email settings, the DVR must be connected to a local area network (LAN)
that maintains an SMTP mail server. The network must also be connected to either an intranet or
the Internet depending on the location of the e-mail accounts to which you want to send
notification. Additional, the Preferred DNS server must be configured.
Before you start
Make sure you have configured the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway and the
Preferred DNS Server in the Network Settings menu. Please refer to Chapter 10.1 Configuring
General Settings for detailed information.
Step 1 Enter the Network Settings interface.
Menu > Configuration > Network
Step 2 Select the Email tab to enter the Email Settings interface.
Figure 10-21 Email Settings Interface