User Manual
Table Of Contents
- Product Key Features
- Chapter 1 Introduction
- Chapter 2 Getting Started
- 2.1 Starting Up and Shutting Down the DVR
- 2.2 Activating the Device
- 2.3 Using the Unlock Pattern for Login
- 2.4 Basic Configuration in Startup Wizard
- 2.5 Login and Logout
- 2.6 Resetting Your Password
- 2.7 Adding and Connecting the IP Cameras
- 2.8 Configuring Custom Protocols
- 2.9 Configuring Signal Input Channel
- Chapter 3 Live View
- Chapter 4 PTZ Controls
- Chapter 5 Recording and Capture Settings
- 5.1 Configuring Encoding Parameters
- 5.2 Configuring Recording and Capture Schedule
- 5.3 Configuring Motion Detection Recording and Capture
- 5.4 Configuring Alarm Triggered Recording and Capture
- 5.5 Configuring Command Triggered Recording and Capture
- 5.6 Configuring Manual Recording and Continous Capture
- 5.7 Configuring Holiday Recording and Capture
- 5.8 Configuring Redundant Recording and Capture
- 5.9 Configuring HDD Group
- 5.10 Files Protection
- 5.11 One-Key Enabling and Disabling H.264+ for Analog Cameras
- Chapter 6 Playback
- 6.1 Playing Back Record Files
- 6.2 Auxiliary Functions of Playback
- Chapter 7 Backup
- Chapter 8 Alarm Settings
- Chapter 9 Smart ATM Settings
- Chapter 10 Network Settings
- Chapter 11 ATM Settings
- Chapter 12 RAID
- Chapter 13 HDD Management
- Chapter 14 Camera Settings
- Chapter 15 DVR Management and Maintenance
- Chapter 16 Others
- Chapter 17 Appendix
ATM Digital Video Recorder User Manual
141
Figure 9-10 Rule Configuration
Step 7 Draw the rule region.
1) Click Draw Max. Size to draw the maximum size of the human face.
2) Click Draw Min. Size to draw the minimum size of the human face.
The max. face size should be larger than the min. face size.
Step 8 Configure the alarm response actions. Refer to step 10 of Chapter 9.1 Panel Mode for details.
Step 9 Click Apply in Smart ATM Configuration interface to save the settings.
9.4 Safety Cabin Mode
Purpose
Safety cabin mode supports the following smart ATM protection rule types: intrusion, object
removal or unattended baggage, violent motion, tailing, falling down, and sudden change of sound
intensity. Eight rules can be set for the mode. You can set the alarm response actions once the
configured rule is triggered.
Up to 2-ch safety cabin mode, or up to 1-ch human face mode and 1-ch safety cabin mode can be
enabled.
Step 1 Go to Menu > Camera > Smart ATM Configuration.
Step 2 Select the camera for safety cabin mode configuration.
Step 3 Select Safety Cabin Mode.