User Manual

ATM Digital Video Recorder User Manual
140
Figure 9-9 Human Face Mode
Step 4 Configure Smart ATM Capture. Refer to step 4 of Chapter 9.1 Panel Mode for details.
Step 5 (Optional) Configure the shield region. Refer to step 7 of Chapter 9.1 Panel Mode for details.
Step 6 Select the rule and click to configure the rule.
1) Edit Name.
2) Check Type. Normal Human Face, Abnormal Human Face, Multiple Human Faces,
Wearing Sunglasses, and Using Mobile Phone are selectable.
3) (Optional) Check Enable Picture-in-Picture.
4) (Optional) If you enable picture-in-picture, select Overlaid Camera and Overlaid Position.
The video of the camera enabled human face mode will be overlaid on the selected
position of the image of the selected camera in picture-in-picture mode.
5) Select Alarm Duration.
6) Click OK to save the settings.