User Manual

ATM Digital Video Recorder User Manual
136
4) Click OK to save the settings.
Figure 9-5 Rule Configuration
Rules of different types can be enabled together for the panel mode.
Step 9 Draw the rule region.
1) Select a rule.
2) Click the buttons to draw the rule region.
If you select Human Entrance, click Draw Entrance Region to draw the region. If you
select Operation Timeout, Sticking Scrip, and Installing Scanner, click Draw Rectangular
Frame, Draw Polygon, or Full Screen to draw the region.
Step 10 Configure the alarm response actions.
1) Select a rule.
2) Click to configure Trigger Channel, Arming Schedule, and Linkage Action. Refer to
step 5 of Chapter 8.1 Setting Motion Detection for details.
3) Click OK to save the settings.