User Manual

ATM Digital Video Recorder User Manual
134
1) Click Target Overlay.
2) Check Display Target Info. on Alarm Picture or Display Rule Info. on Alarm Picture. Once
they are checked, the target or rule information will be overlaid on the captured picture.
3) Click Apply to save the settings.
Figure 9-3 Target Overlay Configuration
Step 6 Configure Scene Description.
1) Click Scene Description.
2) Configure the scene parameters in panel mode.
 Mounting Location: The mounting location of the camera. Indoor and Outdoor are
selectable.
 Mounting Type: The mounting type of the camera. Pinhole and Ceiling are selectable.
 Standing Region Contained in Scene: Whether the scene contains the human standing
region.
3) Click Apply to save the settings.