User Manual
Table Of Contents
- Product Key Features
- Chapter 1 Introduction
- Chapter 2 Getting Started
- 2.1 Starting Up and Shutting Down the DVR
- 2.2 Activating the Device
- 2.3 Using the Unlock Pattern for Login
- 2.4 Basic Configuration in Startup Wizard
- 2.5 Login and Logout
- 2.6 Resetting Your Password
- 2.7 Adding and Connecting the IP Cameras
- 2.8 Configuring Custom Protocols
- 2.9 Configuring Signal Input Channel
- Chapter 3 Live View
- Chapter 4 PTZ Controls
- Chapter 5 Recording and Capture Settings
- 5.1 Configuring Encoding Parameters
- 5.2 Configuring Recording and Capture Schedule
- 5.3 Configuring Motion Detection Recording and Capture
- 5.4 Configuring Alarm Triggered Recording and Capture
- 5.5 Configuring Command Triggered Recording and Capture
- 5.6 Configuring Manual Recording and Continous Capture
- 5.7 Configuring Holiday Recording and Capture
- 5.8 Configuring Redundant Recording and Capture
- 5.9 Configuring HDD Group
- 5.10 Files Protection
- 5.11 One-Key Enabling and Disabling H.264+ for Analog Cameras
- Chapter 6 Playback
- 6.1 Playing Back Record Files
- 6.2 Auxiliary Functions of Playback
- Chapter 7 Backup
- Chapter 8 Alarm Settings
- Chapter 9 Smart ATM Settings
- Chapter 10 Network Settings
- Chapter 11 ATM Settings
- Chapter 12 RAID
- Chapter 13 HDD Management
- Chapter 14 Camera Settings
- Chapter 15 DVR Management and Maintenance
- Chapter 16 Others
- Chapter 17 Appendix
ATM Digital Video Recorder User Manual
132
Chapter 9 Smart ATM Settings
For iDS-8104AHQXLI-E4 ATM DVR, you can enable smart ATM function. Four smart ATM modes are
supported: panel mode, environment mode, human face mode, and safety cabin mode.
The ATM DVR supports up to 4-ch smart ATM configuration of panel mode, environment
mode, human face mode, and safety cabin mode together; up to 2-ch human face mode, or
up to 2-ch safety cabin, or up to 1-ch human face mode and 1-ch safety cabin mode
together. Panel mode and environment mode can be enabled for all the cameras
respectively.
You can only enable one mode for the same camera.
9.1 Panel Mode
Purpose
Panel mode supports the following smart ATM protection rule types: human entrance, operation
timeout, sticking scrip, and installing scanner. Eight rules can be set for the mode. You can set the
alarm response actions once the configured rule is triggered.
Step 1 Go to Menu > Camera > Smart ATM Configuration.
Step 2 Select the camera for panel mode configuration.
Step 3 Select Panel Mode.