User Manual

ATM Digital Video Recorder User Manual
126
Step 6 Repeat the above steps to finish settings of other channels, or click Copy to copy the above
settings to them.
Step 7 Click Apply to save the settings.
8.5 Setting All-day Video Quality Diagnostics
Purpose
The device provides two ways to diagnose the video quality: manual and all-day. Perform the
following steps to set the threshold of the diagnosing and the linkage actions.
Step 1 Enter Video Quality Diagnostics Settings interface of Camera Management.
Menu> Camera> Video Quality Diagnostics
Figure 8-13 Video Quality Diagnostics Interface
Step 2 Select a channel for video quality diagnostics.
Step 3 Check the checkbox of Enable Video Quality Diagnostics.
To enable video quality diagnostics, the function should be supported by the selected camera.
Step 4 Enable and set the threshold of the diagnostic types, there are Blurred Image, Abnormal
Brightness, and Color Cast.
Check the corresponding checkbox of the diagnostic type, and adjust the threshold of it by
dragging the bar.
The higher the threshold you set, the harder the exception will be detected.
Step 5 Click to set handling method of video quality diagnostics.
1) Click Arming Schedule tab to set the arming schedule of response action.