User Manual

ATM Digital Video Recorder User Manual
124
Select one day of a week and up to eight time periods can be set within each day. Or
you can click Copy to copy the time period settings to other day(s).
Time periods shall not be repeated or overlapped.
Figure 8-10 Set Arming Schedule of Video Loss
2) Select Linkage Action tab to set up alarm response actions of video loss (Refer to
Chapter 8.7 Setting Alarm Response Actions).
3) Click OK to complete the video loss settings of the channel.
Step 5 Repeat the above steps to finish settings of other channels, or click Copy to copy the above
settings to them.
Step 6 Click Apply to save the settings.
8.4 Detecting Video Tampering
Purpose
Trigger alarm when the lens is covered and take alarm response action(s).
Step 1 Enter Video Tampering interface of Camera Management.
Menu> Camera> Video Tampering Detection