User Manual

ATM Digital Video Recorder User Manual
120
1) Click Trigger Channel tab and select one or more channels which will start to record or
become full-screen monitoring when motion alarm is triggered.
Figure 8-3 Set Trigger Camera of Motion Detection
2) Select Arming Schedule tab to set the channel’s arming schedule.
Select one day of a week and up to eight time periods can be set within each day. Or
you can click the Copy button to copy the time period settings to other day(s).
Time periods shall not be repeated or overlapped.
Figure 8-4 Set Arming Schedule of Motion Detection
3) Click Linkage Action tab to set up alarm response actions of motion alarm (Please refer
to Chapter 8.7 Setting Alarm Response Actions).
4) Click OK to complete the motion detection settings of the channel.
Step 6 If you want to set motion detection for another channel, repeat the above steps or just
copy the above settings to it.
You are not allowed to copy the “Trigger Channel” action.