Quick Start Guide
Table Of Contents
- Chapter1 Panels Description
- Chapter 2 Installation and Connections
- Chapter 3 Menu Operation
- 3.1 Menu Structure
- 3.2 Startup and Shutdown
- 3.3 Activating Your Device
- 3.4 Using the Unlock Pattern for Login
- 3.5 Login and Logout
- 3.6 Using the Setup Wizard
- 3.7 Configuring Signal Input Channel
- 3.8 Network Settings
- 3.9 General Settings
- 3.10 Adding IP Cameras
- 3.11 Configuring Custom Protocols
- 3.12 Live View
- 3.13 ATM Settings
- 3.14 Smart ATM Settings
- 3.15 Recording Settings
- 3.16 Playback
- Chapter 4 Accessing by Web Browser
ATM Digital Video Recorder Quick Start Guide
32
Figure 3-29 Data Package Settings
Step 6 Click Apply to finish the ATM settings.
3.14 Smart ATM Settings
For iDS-8104AHQXLI-E4 ATM DVR, you can enable smart ATM function. Four smart ATM modes
are supported: panel mode, environment mode, human face mode, and safety cabin mode. Here
we take panel mode as an example.
The ATM DVR supports up to 4-ch smart ATM configuration of panel mode, environment
mode, human face mode, and safety cabin mode together; up to 2-ch human face mode, or
up to 2-ch safety cabin, or up to 1-ch human face mode and 1-ch safety cabin mode
together. Panel mode and environment mode can be enabled for all the cameras
respectively.
You can only enable one mode for the same camera.
Step 1 Go to Menu > Camera > Smart ATM Configuration.
Step 2 Select the camera for panel mode configuration.
Step 3 Select Panel Mode.