Quick Start Guide
Table Of Contents
- Chapter 1 Panels Description
- 1.1 Front Panel
- 1.1.1 iDS-96000NXI-I16(B) and iDS-96000NXI-I16/G(B) Series
- 1.1.2 iDS-96000NXI-I24(B) and iDS-96000NXI-I24/G(B) Series
- 1.1.3 iDS-9600NXI-I8/8F(B) and iDS-9600NXI-I8/16S(B) Series
- 1.1.4 iDS-9600NXI-I16/8F(B) and iDS-9600NXI-I16/16S(B) Series
- 1.1.5 iDS-7700NXI-I4/(16P)/16S(B), iDS-7600NXI-I2/8F and iDS-7600NXI-I2/P/8F Series
- 1.1.6 iDS-6700NXI-I/8F(B) and iDS-6700NXI-I/16S(B) Series
- 1.1.7 iDS-9600NXI-I8/4F(B)
- 1.2 Rear Panel
- 1.2.1 iDS-96000NXI-I16/24(B), iDS-96000NXI-I16/G(B) and iDS-96000NXI-I24/G(B) Series
- 1.2.2 iDS-9600NXI-I8/8F(B) and iDS-9600NXI-I8/16S(B) Series
- 1.2.3 iDS-9600NXI-I16/8F(B) and iDS-9600NXI-I16/16S(B) Series
- 1.2.4 iDS-7700NXI-I4/(16P)/16S(B) Series
- 1.2.5 iDS-7600NXI-I2/8F and iDS-7600NXI-I2/P/8F Series
- 1.2.6 iDS-6700NXI-I/16S(B) and iDS-6700NXI-I/8F(B) Series
- 1.2.7 iDS-9600NXI-I8/4F(B)
- 1.1 Front Panel
- Chapter 2 Installation and Connections
- Chapter 3 Menu Operation
- Chapter 4 Face Picture Comparison
- Chapter 5 Access by Web Browser
Network Video Recorder Quick Start Guide
24
Figure 1-19 iDS-6700NXI-I/8F(B) Series Rear Panel
Table 1-13 Panel Description
Index
Item
Description
1
LINE IN
3.5mm interface for line in; connect to audio input device
or active pick-up, microphone, etc.
2
RS-232
Serial interface for configuration of device’s parameters or
used as transparent channel.
3
VGA
DB9 connector for VGA output. Display local video output
and menu.
4
Power Supply
12 VDC power supply.
5
SW
SW dial switch.
6
USB 2.0 Interface
Universal Serial Bus (USB) interface for additional devices
such as USB mouse and USB Hard Disk Drive (HDD).
7
LAN1/LAN2
10/100/1000 Mbps self-adaptive Ethernet interface.
8
AUDIO OUT
3.5mm interface; connect to audio output device, e.g.,
loudspeaker, etc.
9
HDMI
HDMI video output connector.
10
USB 2.0 Interface
Universal Serial Bus (USB) interface for additional devices
such as USB mouse and USB Hard Disk Drive (HDD).
11
RS-485
RS-485 serial interface; connect to pan/tilt unit, speed
dome, etc.
ALARM IN
Relay alarm input.
ALARM OUT
Relay alarm output.
12
GND
Grounding.