User Manual

Digital Video Recorder User Manual
48
face detection, vehicle detection, line crossing detection, etc.
Steps
1. Go to System → Event.
2. Configure the event detection and select the channel(s) to trigger the recording when event
occurs. Refer to Event for details.
3. Go to Camera → Encoding Parameters → Recording Parameters.
4. Set the event main stream/sub-stream recording parameters for the camera.
5. Go to Storage → Recording Schedule.
6. Select the recording type to Event.
7. Drag the mouse on the time bar to set the event detection recording schedule. Refer to
Configure Recording Schedule for details.
4.1.8 Configure Alarm Triggered Recording
You can configure the recording triggered by the motion detection, face detection, vehicle
detection, line crossing detection, etc.
Steps
1. Go to System → Event → Normal Event → Alarm Input.
2. Configure the alarm input and select the channel(s) to trigger the recording when alarm occurs.
Refer to Event for details.
3. Go to Camera → Encoding Parameters → Recording Parameters.
4. Set the event main stream/sub-stream recording parameters for the camera.
5. Go to Storage → Recording Schedule.
6. Select the recording type to Alarm.
7. Drag the mouse on the time bar to set the alarm recording schedule. Refer to Configure
Recording Schedule for details.
4.1.9 Configure Picture Capture
The picture refers to the live picture capture in continuous or event recording type. Only certain
models support this function.
Steps
1. Go to Camera → Encoding Parameters → Capture.
2. Set the picture parameters.
Resolution
Set the resolution of the picture to capture.
Picture Quality
Set the picture quality to low, medium or high. The higher picture quality results in more
storage space requirement.
Interval