User Manual
Table Of Contents
- Chapter 1 Startup
- Chapter 2 Live View
- Chapter 3 Playback
- Chapter 4 File Search
- Chapter 5 Configuration (Easy Mode)
- Chapter 6 Configuration (Expert Mode)
- 6.1 System Configuration
- 6.2 Network Configuration
- 6.3 Camera Management
- 6.4 Event Configuration
- 6.5 Recording Management
- 6.6 RS-232 Settings
- 6.7 Face Picture Library Management
- Chapter 7 Maintenance
- Chapter 8 Alarm
- Chapter 9 Web Operation
- Chapter 10 Appendix
Digital Video Recorder User Manual
67
Figure 6-22 Face Picture Comparison
2. Select a camera.
3. Turn on Enable.
4. Select the face picture library (or libraries) in List Library Linkage.
5. Set the face picture library similarity.
Similarity
Similarity value ranges from 0 to 100. Device will analyze the similarity between the detected
face picture and face pictures in the library. When the similarity reaches the threshold value,
the face picture comparison succeeded, and the face picture is recognized.
6. Set the arming schedule. Refer to Configure Arming Schedule for details.
7. Set the linkage actions for Linkage Succeeded and Linkage Failed. Refer to Configure Alarm
Linkage Action for details.
Linkage Succeeded
The device will perform linkage actions when the face picture comparison succeeded.
Linkage Failed
The device will perform linkage actions when the face picture comparison failed.
8. Click Apply.
6.4.4 Configure Arming Schedule
Steps
1. Click Arming Schedule.
2. Choose one day of a week and set the time segment. Up to eight time periods can be set within
each day.