User Manual
Table Of Contents
- Chapter 1 Startup
- Chapter 2 Live View
- Chapter 3 Playback
- Chapter 4 File Search
- Chapter 5 Configuration (Easy Mode)
- Chapter 6 Configuration (Expert Mode)
- 6.1 System Configuration
- 6.2 Network Configuration
- 6.3 Camera Management
- 6.4 Event Configuration
- 6.5 Recording Management
- 6.6 RS-232 Settings
- 6.7 Face Picture Library Management
- Chapter 7 Maintenance
- Chapter 8 Alarm
- Chapter 9 Web Operation
- Chapter 10 Appendix
Digital Video Recorder User Manual
50
Figure 6-9 Port Settings
6.2.8 Hik-Connect
Go to Configuration → Network → Platform Access. Refer to Hik-Connect for details.
6.2.9 Email
Go to Configuration → Network → Email. Refer to Email for details.
6.3 Camera Management
6.3.1 Configure Signal Input
For certain digital video recorder models, you can configure the analog and IP signal input types.
Steps
1. Go to Configuration → Analog → Analog, or click Edit at the upper-right corner in Configuration
→ Camera → Camera.
2. Select signal input type as HD/CVBS or IP.
HD/CVBS
Four types of analog signal inputs including Turbo HD, AHD, HDCVI, and CVBS can be
connected randomly for the channel.