User Manual
Table Of Contents
- Chapter 1 Startup
- Chapter 2 Live View
- Chapter 3 Playback
- Chapter 4 File Search
- Chapter 5 Configuration (Easy Mode)
- Chapter 6 Configuration (Expert Mode)
- 6.1 System Configuration
- 6.2 Network Configuration
- 6.3 Camera Management
- 6.4 Event Configuration
- 6.5 Recording Management
- 6.6 RS-232 Settings
- 6.7 Face Picture Library Management
- Chapter 7 Maintenance
- Chapter 8 Alarm
- Chapter 9 Web Operation
- Chapter 10 Appendix
Digital Video Recorder User Manual
48
Figure 6-8 Two-Way Authentication
2. Install the CA certificate in CA Certificate.
3. Click Create in Client Certificate, and follow the pop-up to create the certificate.
4. Click Download to download the certificate file to a desired location.
5. Upload the downloaded certificate file to the server, and the server will return the certificate
key.
6. Open the certificate as a text file, and modify it by the certificate key as the server returned.
7. Install the modified certificate in Client Certificate.
8. Optional: Click Test to test if the connection is valid.
9. Click Save.
6.2.6 NTP
Your device can connect to a network time protocol (NTP) server to ensure that the system time is
accurate.
Steps
1. Go to Configuration → Network → General → NTP.
2. Turn on Enable.
3. Enter the parameters.
Interval
Time interval between two time synchronization with NTP server.
NTP Server
IP address of the NTP server.