User Manual
Table Of Contents
- Chapter 1 Startup
- Chapter 2 Live View
- Chapter 3 Playback
- Chapter 4 File Search
- Chapter 5 Configuration (Easy Mode)
- Chapter 6 Configuration (Expert Mode)
- 6.1 System Configuration
- 6.2 Network Configuration
- 6.3 Camera Management
- 6.4 Event Configuration
- 6.5 Recording Management
- 6.6 RS-232 Settings
- 6.7 Face Picture Library Management
- Chapter 7 Maintenance
- Chapter 8 Alarm
- Chapter 9 Web Operation
- Chapter 10 Appendix
Digital Video Recorder User Manual
29
Edit Connected Network Camera
You can edit the IP address, protocol and other parameters of the added network cameras.
Steps
1. Go to Configuration → Camera → IP Camera.
2. Click to edit the selected camera.
Channel Port
If the connected device is an encoding device with multiple channels, you can select the
channel port No. to choose a connecting channel.
3. Click OK.
5.3.4 OSD Settings
Configure OSD (On-Screen Display) settings for the camera, including date format, camera name,
etc.
Steps
1. Go to Configuration → Camera → OSD.
2. Select a camera.
Figure 5-11 OSD
3. Set parameters as your desire.
4. Drag the text frames on the preview window to adjust the OSD position.
5. Click Apply.
5.3.5 Motion Detection
Motion detection enables the video recorder to detect the moving objects in the monitored area