User Manual
Table Of Contents
- Chapter 1 Basic Operation
- Chapter 2 Camera Settings
- Chapter 3 Live View
- Chapter 4 Recording and Playback
- 4.1 Recording
- 4.1.1 Configure Recording Parameters
- 4.1.2 Enable the H.265 Stream Access
- 4.1.3 ANR
- 4.1.4 Manual Recording
- 4.1.5 Configure Plan Recording
- 4.1.6 Configure Continuous Recording
- 4.1.7 Configure Motion Detection Triggered Recording
- 4.1.8 Configure Event Triggered Recording
- 4.1.9 Configure Alarm Triggered Recording
- 4.1.10 Configure Picture Capture
- 4.1.11 Configure Holiday Recording
- 4.1.12 Configure Redundant Recording and Capture
- 4.2 Playback
- 4.3 Playback Operations
- 4.1 Recording
- Chapter 5 Event
- 5.1 Normal Event Alarm
- 5.2 VCA Event Alarm
- 5.2.1 Temperature Screening
- 5.2.2 Loitering Detection
- 5.2.3 People Gathering Detection
- 5.2.4 Fast Moving Detection
- 5.2.5 Parking Detection
- 5.2.6 Unattended Baggage Detection
- 5.2.7 Object Removal Detection
- 5.2.8 Audio Exception Detection
- 5.2.9 Defocus Detection
- 5.2.10 Sudden Scene Change Detection
- 5.2.11 PIR Alarm
- 5.2.12 Thermal Camera Detection
- 5.2.13 Configure Queue Management
- 5.3 Configure Arming Schedule
- 5.4 Configure Linkage Actions
- Chapter 6 Smart Analysis
- 6.1 Engine Configuration
- 6.2 Task Configuration
- 6.3 Face Picture Comparison
- 6.4 Perimeter Protection
- 6.5 Human Body Detection
- 6.6 Multi-Target-Type Detection
- 6.7 Vehicle Detection
- 6.8 Target Detection
- 6.9 People Counting
- 6.10 Heat Map
- Chapter 7 File Management
- Chapter 8 Storage
- Chapter 9 POS Configuration
- Chapter 10 Hot Spare Recorder Backup
- Chapter 11 Network Settings
- Chapter 12 User Management and Security
- Chapter 13 System Management
- Chapter 14 Appendix
- 14.1 Glossary
- 14.2 Communication Matrix
- 14.3 Device Command
- 14.4 Frequently Asked Questions
- 14.4.1 Why is there a part of channels displaying “No Resource” or turning black screen in multi-screen of live view?
- 14.4.2 Why is the video recorder notifying not support the stream type?
- 14.4.3 Why is the video recorder notifying risky password after adding network camera?
- 14.4.4 How to improve the playback image quality?
- 14.4.5 How to confirm the video recorder is using H.265 to record video?
- 14.4.6 Why is the timeline at playback not constant?
- 14.4.7 When adding network camera, the video recorder notifies network is unreachable.
- 14.4.8 Why is the IP address of network camera being changed automatically?
- 14.4.9 Why is the video recorder notifying IP conflict?
- 14.4.10 Why is image getting stuck when the video recorder is playing back by single or multi-channel cameras?
- 14.4.11 Why does my video recorder make a beeping sound after booting?
- 14.4.12 Why is there no recorded video after setting the motion detection?
- 14.4.13 Why is the sound quality not good in recording video?
Network Video Recorder User Manual
xviii
13.10.2 ISAPI Service ....................................................................................................... 159
13.10.3 HTTP Authentication .......................................................................................... 159
13.10.4 IP Camera Occupation Detection ....................................................................... 160
Chapter 14 Appendix .............................................................................................................. 161
14.1 Glossary ........................................................................................................................... 161
14.2 Communication Matrix ................................................................................................... 162
14.3 Device Command............................................................................................................. 163
14.4 Frequently Asked Questions ........................................................................................... 163
14.4.1 Why is there a part of channels displaying “No Resource” or turning black
screen in multi-screen of live view? ....................................................................... 163
14.4.2 Why is the video recorder notifying not support the stream type? .................. 164
14.4.3 Why is the video recorder notifying risky password after adding network
camera? ................................................................................................................... 164
14.4.4 How to improve the playback image quality? .................................................... 164
14.4.5 How to confirm the video recorder is using H.265 to record video? ................. 164
14.4.6 Why is the timeline at playback not constant? ................................................... 165
14.4.7 When adding network camera, the video recorder notifies network is
unreachable. ............................................................................................................ 165
14.4.8 Why is the IP address of network camera being changed automatically? ........ 165
14.4.9 Why is the video recorder notifying IP conflict? ................................................. 166
14.4.10 Why is image getting stuck when the video recorder is playing back by single or
multi-channel cameras? .......................................................................................... 166
14.4.11 Why does my video recorder make a beeping sound after booting? .............. 166
14.4.12 Why is there no recorded video after setting the motion detection? ............. 166
14.4.13 Why is the sound quality not good in recording video? ................................... 167