User Manual
Table Of Contents
- Chapter 1 Basic Operation
- Chapter 2 Camera Settings
- Chapter 3 Live View
- Chapter 4 Recording and Playback
- 4.1 Recording
- 4.1.1 Configure Recording Parameters
- 4.1.2 Enable the H.265 Stream Access
- 4.1.3 ANR
- 4.1.4 Manual Recording
- 4.1.5 Configure Plan Recording
- 4.1.6 Configure Continuous Recording
- 4.1.7 Configure Motion Detection Triggered Recording
- 4.1.8 Configure Event Triggered Recording
- 4.1.9 Configure Alarm Triggered Recording
- 4.1.10 Configure Picture Capture
- 4.1.11 Configure Holiday Recording
- 4.1.12 Configure Redundant Recording and Capture
- 4.2 Playback
- 4.3 Playback Operations
- 4.1 Recording
- Chapter 5 Event
- 5.1 Normal Event Alarm
- 5.2 VCA Event Alarm
- 5.2.1 Temperature Screening
- 5.2.2 Loitering Detection
- 5.2.3 People Gathering Detection
- 5.2.4 Fast Moving Detection
- 5.2.5 Parking Detection
- 5.2.6 Unattended Baggage Detection
- 5.2.7 Object Removal Detection
- 5.2.8 Audio Exception Detection
- 5.2.9 Defocus Detection
- 5.2.10 Sudden Scene Change Detection
- 5.2.11 PIR Alarm
- 5.2.12 Thermal Camera Detection
- 5.2.13 Configure Queue Management
- 5.3 Configure Arming Schedule
- 5.4 Configure Linkage Actions
- Chapter 6 Smart Analysis
- 6.1 Engine Configuration
- 6.2 Task Configuration
- 6.3 Face Picture Comparison
- 6.4 Perimeter Protection
- 6.5 Human Body Detection
- 6.6 Multi-Target-Type Detection
- 6.7 Vehicle Detection
- 6.8 Target Detection
- 6.9 People Counting
- 6.10 Heat Map
- Chapter 7 File Management
- Chapter 8 Storage
- Chapter 9 POS Configuration
- Chapter 10 Hot Spare Recorder Backup
- Chapter 11 Network Settings
- Chapter 12 User Management and Security
- Chapter 13 System Management
- Chapter 14 Appendix
- 14.1 Glossary
- 14.2 Communication Matrix
- 14.3 Device Command
- 14.4 Frequently Asked Questions
- 14.4.1 Why is there a part of channels displaying “No Resource” or turning black screen in multi-screen of live view?
- 14.4.2 Why is the video recorder notifying not support the stream type?
- 14.4.3 Why is the video recorder notifying risky password after adding network camera?
- 14.4.4 How to improve the playback image quality?
- 14.4.5 How to confirm the video recorder is using H.265 to record video?
- 14.4.6 Why is the timeline at playback not constant?
- 14.4.7 When adding network camera, the video recorder notifies network is unreachable.
- 14.4.8 Why is the IP address of network camera being changed automatically?
- 14.4.9 Why is the video recorder notifying IP conflict?
- 14.4.10 Why is image getting stuck when the video recorder is playing back by single or multi-channel cameras?
- 14.4.11 Why does my video recorder make a beeping sound after booting?
- 14.4.12 Why is there no recorded video after setting the motion detection?
- 14.4.13 Why is the sound quality not good in recording video?
Network Video Recorder User Manual
xvii
13.2 Configure Time ................................................................................................................ 144
13.2.1 Manual Time Synchronization ............................................................................. 145
13.2.2 NTP Synchronization ............................................................................................ 145
13.2.3 DST Synchronization............................................................................................. 145
13.3 Network Detection .......................................................................................................... 146
13.3.1 Network Traffic Monitoring ................................................................................. 146
13.3.2 Test Network Delay and Packet Loss ................................................................... 146
13.3.3 Export Network Packet ........................................................................................ 147
13.3.4 Network Resource Statistics ................................................................................ 147
13.4 Storage Device Maintenance .......................................................................................... 148
13.4.1 Bad Sector Detection............................................................................................ 148
13.4.2 S.M.A.R.T. Detection ............................................................................................ 149
13.4.3 HDD Health Detection .......................................................................................... 149
13.4.4 Configure Disk Clone ............................................................................................ 150
13.4.5 Repair Database ................................................................................................... 151
13.5 Upgrade Device ............................................................................................................... 151
13.5.1 Upgrade by Local Backup Device ......................................................................... 151
13.5.2 Upgrade by FTP .................................................................................................... 152
13.5.3 Upgrade by Web Browser .................................................................................... 152
13.5.4 Upgrade by Hik-Connect ...................................................................................... 153
13.6 Import/Export Device Configuration Files ...................................................................... 153
13.7 Log Management ............................................................................................................. 154
13.7.1 Log Storage ........................................................................................................... 154
13.7.2 Search & Export Log Files ..................................................................................... 154
13.7.3 Upload Logs to the Server .................................................................................... 155
13.7.4 One-Way Authentication ..................................................................................... 156
13.7.5 Two-Way Authentication ..................................................................................... 157
13.8 Export Diagnostic Information ........................................................................................ 158
13.9 Restore Default Settings ................................................................................................. 158
13.10 Security Management ................................................................................................... 159
13.10.1 RTSP Authentication .......................................................................................... 159