User Manual

Steps
1. Go to
Conguraon → VCA → Behavior Analysis .
2. Select a camera.
3. Check Enable Local VCA Behavior Analysis, and the device will analyze the video, cameras only
transmit video stream.
4. Set Behavior Analysis Subtype as Work Behavior Analysis.
5. Set rules and
detecon areas.
1) Click to add a rule.
2) Select Rule Type as People Overstay Detecon.
3) Enter the rule name.
4) Enable the rule.
5) Set Mode.
Arbitrary Mode
When there are people staying in the
detecon area among the leaving crowd, the device
will trigger an alarm.
Single Person Mode
When there is only one person staying in the detecon area among the leaving crowd, the
device will trigger an alarm.
6) Set the
duraon me. It will trigger the alarm when the me exceeds the limit.
7)
Oponal: Check Overlay Rule Frame or Overlay Target Frame, the rule frame or target frame
will be displayed on the captured picture.
8) Click
to draw the detecon area in the preview window.
9) Click Save.
Network Video Recorder User Manual
71