User Manual

ManualsBrandsHikvision ManualsIP ProductsDeepinMind NVS

Table Of Contents

Legal Information
Regulatory Information
Applicable Model
Symbol Conventions
Safety Instruction
Preventive and Cautionary Tips
Chapter 1 Basic Operation
- 1.1 Activate Your Device
- 1.2 Configure TCP/IP Settings
- 1.3 HDD Settings
- 1.4 Add Network Camera
- 1.5 Platform Access
  - 1.5.1 Configure Guarding Vision
Chapter 2 Camera Settings
- 2.1 Configure Image Parameters
- 2.2 Configure OSD Settings
- 2.3 Configure Privacy Mask
- 2.4 IP Camera Time Sync
- 2.5 Import/Export IP Camera Configuration Files
- 2.6 Upgrade IP Cameras
Chapter 3 Live View
- 3.1 Start Live View
  - 3.1.1 Configure Live View Settings
  - 3.1.2 Configure Live View Layout
    - Configure Custom Live View Layout
    - Configure Live View Mode
- 3.2 Configure Auto-Switch of Cameras
- 3.3 Digital Zoom
- 3.4 Fisheye View
- 3.5 POS Information Overlay
- 3.6 3D Positioning
- 3.7 Live View Strategy
- 3.8 Configure Channel-Zero Encoding
- 3.9 Main and Auxiliary Ports Strategy
- 3.10 PTZ Control
Chapter 4 Recording and Playback
- 4.1 Recording
- 4.2 Playback
- 4.3 Playback Operations
Chapter 5 Event
- 5.1 Normal Event Alarm
- 5.2 VCA Event Alarm
- 5.3 Configure Arming Schedule
- 5.4 Configure Linkage Actions
Chapter 6 Smart Analysis
- 6.1 Engine Configuration
- 6.2 Work Behavior Analysis
- 6.3 Street Behavior Analysis
- 6.4 Not Wearing Hard Hat Detection
- 6.5 Face Picture Library Management
  - 6.5.1 Add a Face Picture Library
  - 6.5.2 Upload Face Pictures to the Library
- 6.6 Perimeter Protection
- 6.7 Smart Search
- 6.8 Target Detection
- 6.9 People Counting
- 6.10 Heat Map
Chapter 7 File Management
- 7.1 Search Files
- 7.2 Export Files
- 7.3 Smart Search
Chapter 8 POS Configuration
- 8.1 Configure POS Connection
- 8.2 Configure POS Text Overlay
- 8.3 Configure POS Alarm
Chapter 9 Storage
- 9.1 Storage Device Management
- 9.2 Disk Array
  - 9.2.1 Create a Disk Array
    - One-Touch Creation
    - Manual Creation
  - 9.2.2 Rebuild an Array
Chapter 10 Hot Spare Recorder Backup
- 10.1 Set Hot Spare Device
- 10.2 Set Working Recorder
- 10.3 Manage Hot Spare System
Chapter 11 Network Settings
- 11.1 Configure DDNS
- 11.2 17.3 Configure PPPoE
- 11.3 Configure Port Mapping (NAT)
- 11.4 Configure SNMP
- 11.5 Configure Email
- 11.6 Configure Port
- 11.7 Configure ONVIF
Chapter 12 User Management and Security
- 12.1 Manage User Accounts
- 12.2 Manage User Permissions
  - 12.2.1 Set User Permissions
  - 12.2.2 Set Live View Permission on Lock Screen
- 12.3 Configure Password Security
  - 12.3.1 Export GUID File
  - 12.3.2 Configure Security Questions
- 12.4 Reset Password
  - 12.4.1 Reset Password by GUID
  - 12.4.2 Reset Password by Security Questions
Chapter 13 System Management
- 13.1 Configure Device
- 13.2 Configure Time
- 13.3 Network Detection
- 13.4 Storage Device Maintenance
- 13.5 Upgrade Device
- 13.6 Import/Export Device Configuration Files
- 13.7 Search & Export Log Files
- 13.8 Restore Default Settings
- 13.9 Security Management
Chapter 14 Appendix
- 14.1 Glossary
- 14.2 Frequently Asked Questions

Figure 5-15 Set Arming Schedule

4. You can click Copy to copy the current day arming schedule sengs to other day(s).

5. Click Apply to save the sengs.

5.4

Congure Linkage Acons

Alarm linkage acons will be acvated when an alarm or excepon occurs, including Event Hint

Display, Full Screen Monitoring, Audible Warning (buzzer),

Nofy Surveillance Center, Trigger Alarm

Output, and Send Email.

5.4.1

Congure Auto-Switch Full Screen Monitoring

When an alarm is triggered, the local monitor displays in full screen the video image from the

alarming channel congured for full screen monitoring. And when the alarm is triggered

simultaneously in several channels, you must

congure the auto-switch dwell me.

Note

Auto-switch will terminate once the alarm stops and back to the live view interface.

Steps

1. Go to System → View → General .

2. Set the event output and dwell me.

Network Video Recorder User Manual