User Manual

Figure 5-9 Unaended Baggage Detecon
4. Check Enable Unaended Baggage Detecon.
5. Oponal: Check Save VCA Picture to save the captured unaended baggage detecon pictures.
6. Set the detecon rules and detecon areas.
1) Select Arming Region. Up to 4 regions are selectable.
2) Drag the sliders to set Time Threshold and
Sensivity.
Time Threshold
The
me of the objects are le in the region. If the value is 10, an alarm is triggered aer
the object is le and stayed in the region for 10s. Its range is [5s-20s].
Sensivity
Similarity of the background image to the object. The higher the value, the easier the
detecon alarm will be triggered.
3) Click Draw Region and draw a quadrilateral in the preview window.
7. Set the arming schedule. Refer to
Congure Arming Schedule .
8. Set linkage acons. Refer to Congure Linkage Acons .
9. Click Apply.
5.2.8 Object Removal
Detecon
The object removal detecon funcon detects the objects removed from a pre-dened region,
such as the exhibits on display, and a series of
acons can be taken when the alarm is triggered.
Steps
1. Go to Smart Analysis → Smart Event Sengs → Other Events .
2. Select a camera.
3. Click Object Removable.
Network Video Recorder User Manual
58