User Manual

Figure 5-3 Facial Detecon
3. Select a camera to congure.
4. Check Enable Face Detecon.
5. Oponal: Check Save VCA Picture to save the captured pictures of face detecon.
6. Set the detecon sensivity. Sensivity range: [1-5]. The higher the value is, the more easily the
face will be detected.
7. Set the arming schedule. Refer to
Congure Arming Schedule .
8. Set linkage acons. Refer to Congure Linkage Acons .
9. Click Apply.
5.2.2
Congure Vehicle Detecon
Vehicle detecon is available for road trac monitoring. In Vehicle Detecon, a passed vehicle can
be detected and the picture of its license plate can be captured. You can send an alarm signal to
nofy the surveillance center and upload the captured picture to an FTP server.
Steps
1. Go to System → Event → Smart Event .
2. Select a camera to
congure.
3. Click Vehicle.
Network Video Recorder User Manual
52