User Manual

Figure 1-12 Protocol Management
2. Set protocol parameters.
Type
The network camera adopng custom protocol must support geng stream through
standard RTSP.
Path
Contact the manufacturer of network camera for the URL (Uniform Resource Locator) of
geng main stream and sub-stream.
Note
The protocol type and the transfer protocol must be supported by the network camera to add.
3. Click OK.
Aer adding the customized protocol, you can see it in Protocol.
1.5
Plaorm Access
1.5.1 Congure Guarding Vision
Guarding Vision enables the mobile phone applicaon and the service plaorm page
(dev.guardingvision.com) to access and manage your connected NVR, providing a convenient
remote access to the surveillance system.
Steps
1. Go to System → Network → Advanced →
Plaorm Access .
2. Check Enable to
acvate the funcon. Then the service terms will pop up.
1) Enter Vericaon Code.
Network Video Recorder User Manual
11