User Manual

Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case leers, lower
case leers, numbers, and special characters) in order to increase the security of your product.
And we recommend you change your password regularly, especially in the high security system,
changing the password monthly or weekly can beer protect your product.
3. Click OK.
1.2 Congure TCP/IP Sengs
TCP/IP sengs must be properly congured before you can operate the device will operate over a
network.
Steps
1. Go to System → Network → TCP/IP .
Figure 1-8 TCP/IP Sengs
2. Select Working Mode as Net-Fault Tolerance or Mul-Address Mode.
Net-Fault Tolerance
The two NIC cards use the same IP address, and you can select the main NIC to LAN1 or
LAN2. In this way, in case of one NIC card failure, the device will
automacally enable the
other standby NIC card so as to ensure the normal running of the system.
Mul-Address Mode
The parameters of the two NIC cards can be congured independently. You can select LAN1
or LAN2 under Select NIC for parameter
sengs. Select one NIC card as the default route.
When the system connects with the extranet, the data will be forwarded through the default
route.
3.
Congure other IP sengs as needed.
4. Click Apply.
Network Video Recorder User Manual
7