User Manual

13.2.1 Manual Time Synchronizaon
Steps
1. Go to System → General .
2.
Congure the date and me.
3. Click Apply to save the
sengs.
13.2.2 NTP Synchronizaon
Connecon to a network me protocol (NTP) server can be congured on your device to ensure
the system’s date and
me accuracy.
Steps
1. Go to System → Network → TCP/IP → NTP .
2. Check Enable.
3.
Congure NTP sengs as need.
Interval (min)
Time interval between two me synchronizaon with NTP server
NTP Server
IP address of the NTP server
NTP Port
Port of the NTP server
4. Click Apply
13.2.3 DST
Synchronizaon
DST (daylight saving me) refers to the period of the year when clocks are moved one period
ahead. In some areas worldwide, this has the eect of creang more sunlit hours in the evening
during months when the weather is the warmest.
We advance our clocks ahead a certain period (depends on the DST bias you set) at the beginning
of DST, and move them back the same period when we return to standard
me (ST).
Steps
1. Go to System → General .
2. Check Enable DST.
3. Set DST mode as Auto or Manual.
Auto
Automacally enable the default DST period according to the local DST rules.
Manual
Network Video Recorder User Manual
139