User Manual

Steps
1. Go to
Conguraon → VCA → Behavior Analysis .
2. Select a camera.
3. Check Enable Local VCA Behavior Analysis, and the device will analyze the video, cameras only
transmit video stream.
4. Set Behavior Analysis Subtype as Street Behavior Analysis.
5. Set rules and
detecon areas.
1) Click to add a rule.
2) Select Rule Type as People Falling Down Detecon.
3) Enter the rule name.
4) Enable the rule.
5) Set
Sensivity. The higher the sensivity, the easier the alarm will be triggered.
6) Oponal: Check Overlay Rule Frame or Overlay Target Frame, the rule frame or target frame
will be displayed on the captured picture.
7) Click
to draw the detecon area in the preview window.
8) Click Save.
Figure 6-9 People Falling Down Detecon
Network Video Recorder User Manual
82