User Manual

User Manual of Network Traffic Speed Dome
© Hikvision
85
5. There will be the certificate information after you successfully create and install the
certificate.
Figure 7-16 Installed Certificate Property
Notes:
 The default port number of HTTPS is 443. The port value ranges from 1 to 65535.
 When the port number is the default number 443, the format of the URL is https://IP
address, eg., https://192.168.1.64.
 When the port number is not the default number 443, the format of the URL is https://IP
address:port number, eg., https://192.168.1.64:81.
Configuring QoS Settings
Purpose:
QoS (Quality of Service) can help solve the network delay and network congestion by configuring
the priority of data sending.
Steps:
1. Enter the QoS settings interface:
Configuration >Advanced Configuration > Network > QoS
Figure 7-17 QoS Settings
2. Configure the QoS settings, including video/audio DSCP, event/alarm DSCP and Management
DSCP.
The valid DSCP value ranges from 0 to 63. The DSCP value is bigger, the priority is higher.
3. Click Save to save the settings.
Notes:
 Make sure that you enable the QoS function of your network device (such as a router).
 It will ask for a reboot for the settings to take effect.
Configuring 802.1X Settings
Purpose:
The speed dome supports IEEE 802.1X standard.
IEEE 802.1X is a port-based network access control. It enhances the security level of the LAN.