User Manual

User Manual of Network Traffic Speed Dome
© Hikvision
80
1. Enter the FTP settings interface:
Configuration > Network > Advanced Settings > FTP
Figure 7-9 FTP Settings
2. Configure the FTP settings, including server address, port, user name, passwords, directory,
and upload type.
Note:
The server address supports both the domain name and IP address formats.
 For your privacy and to better protect your system against security risks, we strongly
recommend the use of strong passwords for all functions and network devices. The
password should be something of your own choosing (using a minimum of 8 characters,
including upper case letters, lower case letters, numbers and special characters) in order
to increase the security of your product.
 Proper configuration of all passwords and other security settings is the responsibility of
the installer and/or end-user.
 Setting the directory in FTP server for saving files:
In the Directory Structure field, you can select the root directory, parent directory and
child directory.
 Root directory: The files will be saved in the root of FTP server.
 Parent directory: The files will be saved in a folder in FTP server. The name of folder can
be defined as shown in following Figure 7-10.
Figure 7-10 Parent Directory
 Child directory: It is a sub-folder which can be created in the parent directory. The files
will be saved in a sub-folder in FTP server. The name of folder can be defined as shown
in Figure 7-11.