User Manual

User Manual of Network Traffic Speed Dome
© Hikvision
40
7. Check Lane No. as demand. Only checked lane is armed for vehicle detection.
8. Click Save.
9. Set arming schedule.
1) Go to Configuration > ITS > Common Settings > Speed Dome Arming Schedule.
2) Check Enable to enable the function.
3) Set arming time of each day by dragging the mouse on time bar.
4) Click on the blue time bar, and click Configuration to set patrol sequence and dwell time
on each scene. To copy the setting of a day to other days, click and select desired
days.
10. Click Save.
5.3 Set Basic Configuration
Figure 5-1 Basic Configuration
Steps:
1. Go to Configuration > ITS > Common Settings > Basic Configuration
2. Set up the following features:
 Camera
Input Device No., Camera No., and Camera Info., and select the Country/Region.
 Listening Server
If the camera uploads alarms in listening mode via our company's SDK, you should set the IP
address and port for the listening server.
 ANR
When the network is disconnected, data is temperately saved on the memory card. When
network connection is resumed, the camera automatically uploads the saved data to the
arming host, in which case, the arming host IP address is required.