User Manual

User Manual of Network Traffic Speed Dome
© Hikvision
118
right side, or click to show the network parameter panel.
 Modify network parameters
Steps:
1. Select the device to be modified in the device list and the network parameters of the device
will be displayed in the Modify Network Parameters panel on the right side.
2. Edit the modifiable network parameters, e.g. IP address and port number.
3. Enter the password of the admin account of the device in the Password field and click
Modify to save the changes.
 For your privacy and to better protect your system against security risks, we strongly
recommend the use of strong passwords for all functions and network devices. The password
should be something of your own choosing (using a minimum of 8 characters, including
upper case letters, lower case letters, numbers and special characters) in order to increase
the security of your product.
 Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
Figure A.1.2 Modify Network Parameters