User Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Network Connection
- Chapter 3 Accessing to the Network Speed Dome
- Chapter 4 Basic Operations
- Chapter 5 ITS Configuration
- 5.1 Set Enforcement
- 5.2 Set Vehicle Detection
- 5.3 Set Basic Configuration
- 5.4 Set Advanced Parameters
- 5.5 Pictures
- 5.6 Set FTP Host
- 5.7 Set Blocklist & Allowlist
- Chapter 6 Speed Dome Configuration
- 6.1 Storage Settings
- 6.2 Basic Event Configuration
- 6.3 Smart Event Configuration
- 6.4 PTZ Configuration
- 6.4.1 Configuring Basic PTZ Parameters
- 6.4.2 Configuring PTZ Limits
- 6.4.3 Configuring Initial Position
- 6.4.4 Configuring Park Actions
- 6.4.5 Configuring Privacy Mask
- 6.4.6 Configuring Scheduled Tasks
- 6.4.7 Clearing PTZ Configurations
- 6.4.8 Prioritize PTZ
- 6.4.9 Configuring Position Settings
- 6.4.10 Configuring Rapid Focus
- Chapter 7 System Configuration
- 7.1 Configuring Network Settings
- 7.2 Configuring Video and Audio Settings
- 7.3 Configuring Image Settings
- 7.4 Configuring System Settings
- Appendix
User Manual of Network Traffic Speed Dome
© Hikvision
97
This function is used to limit the minimum focus distance. The value can be set to 10cm, 50cm,
1.0m, 1.5m, 3m, 6m, 10m and 20m.
Day/Night Switch
Day/Night Switch
The Day/Night Switch mode can be set to Auto, Day, Night and Scheduled-Switch.
Auto:
In Auto mode, the day mode and night mode can switch automatically according to the
light condition of environment.
Figure 7-31 Auto Mode Sensitivity
Day:
In Day mode, the speed dome displays color image. It is used for normal lighting conditions.
Night:
In Night mode, the image is black and white. Night mode can increase the sensitivity in low
light conditions.
Scheduled-Switch:
In Schedule mode, you can set the time schedule for day mode as shown in Figure 7-32.
The rest time out of the schedule is for night mode.
Figure 7-32 Day Night Schedule
Smart Supplement Light
If the light supplement is on and the image center is overexposure, you can enable this function.
IR Light Mode
IR light mode is configurable, and you can set it from the dropdown list.
Notes:
Only the IR speed domes support IR functions.
For the laser speed domes, the laser parameters are similar with IR parameters.
The Day/Night Switch functions vary depending on the model of the speed domes.
Backlight Settings
BLC (Back Light Compensation)
If there’s a bright backlight, the subject in front of the backlight appears silhouetted or dark.