Quick Start Guide
Table Of Contents
- About this Manual
- Trademarks Acknowledgment
- LEGAL DISCLAIMER
- Regulatory Information
- FCC Information
- FCC Conditions
- EU Conformity Statement
- 2012/19/EU (WEEE Directive)
- 2006/66/EC and its amendment 2013/56/EU (Battery Directive)
- Industry Canada ICES-003 Compliance
- Cautions and Warnings
- Laws and Regulations
- Transportation
- Power Supply
- System Security
- Battery
- Maintenance
- Cleaning
- Usage Environment
- Emergency
- Time Synchronization
- Installation
- Symbols and Marks
- Installation
- 1.1*
- 1.2
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
- 2.10
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 4.1
Operation
Activate and Access Network Camera
Scan the QR code to get
Activate and Access Camera
. Note that mobile data charges may apply if Wi-Fi is
unavailable.
Reset and Restore Camera
Press Reset button for about 10s when the camera is powering on or rebooting to restore the default
settings, including the user name, password, IP address, port no., etc.
For the position of the reset button, refer to the figure on page 2.