User Manual

iDS-2CD7xxG0-xxxxx Network Bullet Camera User Manual
UM iDS-2CD7xxG0-xxxxx 021021NA 91
• Display Target info. on Alarm Picture: Overlay the alarm picture with target information.
• Target Picture Settings: Custom, Head Shot, Half-Body Shot, and Full-Body Shot are selectable.
If you select Custom, you can customize width, head height, and body height as required.
You can check Fixed Value to set the picture height.
• Background Picture Settings: Comparing to target picture, background picture is the scene image
offers extra environmental information. You can set the background picture quality and resolution. If
the background image need to be uploaded to surveillance center, check Background Upload.
• People Counting Overlay: Select flow overlay type. Select the daily reset time. Click Manual Reset if you
want to reset right now.
• Camera: You can set Device No. and Camera Info. for the camera, which can be overlaid on captured
picture.
• Text Overlay: You can check desired items and adjust their order to display on captured pictures by
. The content of Device No. and Camera Info should be on the same page.
Multi-Target-Type Detection Algorithm Parameters
Use to set and optimize the parameters of the algorithm library for Multi-Target-Type Detection.
1. Go to Configuration → Multi-Target-Type Detection → Advanced Configuration for configuration.
• HMS Version: The current algorithm version, which cannot be edited.
• Restore Defaults: Click Restore to restore all the settings in advanced configuration to the factory
default.
• Detection Parameters
- Generation Speed: The speed of deciding whether an object in detection area is a target or not.
The higher the value, the faster the target will be detected. The default value is recommended.
- Sensitivity: The sensitivity of recognizing a target. The higher the value, the easier a target will
be recognized, and the higher the possibility for misinformation. The default value is
recommended.
• Capture Parameters
- Best Shot
> Capture Threshold: The quality of face to trigger capture and alarm. Higher value means better
quality must be met to trigger capture and alarm.
- Face Exposure: Enable the function, and the device automatically adjusts exposure level when
human faces appear in the scene.
- Reference Brightness: The reference brightness of a face in face exposure mode. If a face in
the actual scene is brighter than the set reference brightness, the device lowers the exposure