User Manual
Table Of Contents
- Legal Information
- About this Manual
- Trademarks
- Disclaimer
- Symbol Conventions
- Safety Instruction
- Contents
- Chapter 1 System Requirements
- Chapter 2 Device Activation and Accessing
- Illegal Login Lock
- Chapter 3 Live View
- 3
- 3.1 Live View Parameters
- 3.1.1 Enable and Disable Live View
- 3.1.2 Adjust Aspect Ratio
- 3.1.3 Live View Stream Type
- 3.1.4 Select Third-Party Plug-in
- 3.1.5 Window Division
- 3.1.6 Light
- 3.1.7 Count Pixel
- 3.1.8 Start Digital Zoom
- 3.1.9 Auxiliary Focus
- 3.1.10 Lens Initialization
- 3.1.11 Quick Set Live View
- 3.1.12 Lens Parameters Adjustment
- 3.1.13 Conduct 3D Positioning
- 3.2 Set Transmission Parameters
- 3.3 Set Smooth Streaming
- Chapter 4 Video and Audio
- Chapter 5 Video Recording and Picture Capture
- Chapter 6 Events and Alarms
- 6
- 6.1 Basic Event
- 6.2 Smart Event
- 6.2.1 Detect Audio Exception
- 6.2.2 Set Defocus Detection
- 6.2.3 Detect Scene Change
- 6.2.4 Set Face Detection
- 6.2.5 Set Video Loss
- 6.2.6 Set Intrusion Detection
- 6.2.7 Set Line Crossing Detection
- 6.2.8 Set Region Entrance Detection
- 6.2.9 Set Region Exiting Detection
- 6.2.10 Set Unattended Baggage Detection
- 6.2.11 Set Object Removal Detection
- 6.2.12 Draw Area
- 6.2.13 Set Size Filter
- Chapter 7 Network Settings
- Chapter 8 Arming Schedule and Alarm Linkage
- Chapter 9 System and Security
- 9
- 9.1 View Device Information
- 9.2 Search and Manage Log
- 9.3 Simultaneous Login
- 9.4 Import and Export Configuration File
- 9.5 Export Diagnose Information
- 9.6 Reboot
- 9.7 Restore and Default
- 9.8 Upgrade
- 9.9 View Open Source Software License
- 9.10 Time and Date
- 9.11 Set RS-485
- 9.12 Set RS-232
- 9.13 External Device
- 9.14 Security
- 9.15 Certificate Management
- 9.16 User and Account
- Chapter 10 Allocate VCA Resource
- Chapter 11 Open Platform
- Chapter 12 Set EPTZ
- Chapter 13 Smart Display
- Appendix A: Device Command
- Appendix B: Device Communication Matrix
iDS-2CD7xxG0-xxxxx Network Bullet Camera User Manual
UM iDS-2CD7xxG0-xxxxx 021021NA 77
External Device
For devices that support external devices, including the supplement light, wiper on the housing, and the
LED light, you can control them via the Web browser when it is used with the housing. External devices
vary by model.
• Brightness: Adjust Low Beam Brightness and High Beam Brightness according to the actual scene.
• Timing: The LED light will be turned on by the schedule you set. You should set Start Time and End Time.
• Auto: The LED light will be turned on according to the environment illumination.
Supplement Light Settings
You can set supplement light and refer to the actual device for relevant parameters.
• Smart Supplement Light: Smart supplement light avoids overexposure when the supplement light is on.
• Supplement Light Mode: Can be selected if the device supports a supplement light.
• IR Mode: IR light is enabled.
• White Light Mode: White light is enabled.
• Mix Mode: Both IR light and white light are enabled.
• Off: Supplement light is disabled.
• Brightness Adjustment Mode
Auto: The brightness adjusts according to the actual environment automatically.
Manual: You can drag the slider or set value to adjust the brightness.
Security
You can improve system security by setting security parameters.
Authentication
You can improve network access security by setting RTSP and WEB authentication.
1. Go to Configuration → System → Security → Authentication to choose authentication protocol and
method according to your needs.
• RTSP Authentication: Digest and digest/basic are supported, which means authentication information
is needed when an RTSP request is sent to the device. If you select digest/basic, it means the device
supports digest or basic authentication. If you select digest, the device supports only digest
authentication.
• RTSP Digest Algorithm: MD5, SHA256, and MD5/SHA256 encrypted algorithm in RTSP authentication. If
you enable the digest algorithm except for MD5, a third-party platform might not be able to log in to