User Manual

iDS-2CD7xxG0-xxxxx Network Bullet Camera User Manual
UM iDS-2CD7xxG0-xxxxx 021021NA 67
2. Start the application and register for a Hik-Connect user account.
3. Log in after registration.
Add Camera to Hik-Connect
Steps
1. Connect your mobile device to a Wi-Fi.
2. Log into the Hik-Connect app.
3. In the home page, tap “+” on the upper-right corner to add a camera.
4. Scan the QR code on camera body or on the Quick Start Guide cover.
If the QR code is missing or too blurry to be recognized, you can also add the camera by
inputting the camera’s serial number.
5. Input the verification code of your camera.
The required verification code is the code you create or change when you enable Hik-
Connect service on the camera.
If you forget the verification code, you can check the current verification code on Platform
Access configuration page via web browser.
6. Tap Connect to a Network button in the popup interface.
7. Choose Wired Connection or Wireless Connection according to your camera function.
• Wireless Connection: Input the Wi-Fi password that your mobile phone has connected to, and tap
Next to start the Wi-Fi connection process. (Locate the camera within 3 meters from the router
when setting up the Wi-Fi.)
• Wired Connection: Connect the camera to the router with a network cable and tap Connected in the
result interface.
The router should be the same one that your mobile phone has connected to.
8. Tap Add in the next interface to finish adding.
For detailed information, refer to the Hik-Connect app user manual.