User Manual

iDS-2CD7xxG0-xxxxx Network Bullet Camera User Manual
UM iDS-2CD7xxG0-xxxxx 021021NA 55
2. Select Server Certificate.
3. Select Encrypted Algorithm.
4. Click Save.
Only certain device models support this function.
If the function is abnormal, check if the selected certificate is abnormal in certificate
management.
Port Mapping
By setting port mapping, you can access devices through the specified port.
Before You Start
When the ports in the device are the same as those of other devices in the network, refer to Port to modify
the device ports.
Steps
1. Go to Configuration → Network → Basic Settings → NAT.
2. Select the port mapping mode.
• Auto Port Mapping: Refer to Set Auto Port Mapping for detailed information.
• Manual Port Mapping: Refer to Set Manual Port Mapping for detailed information.
3. Click Save.
Set Auto Port Mapping
Steps
1. Check Enable UPnP™, and choose a friendly name for the camera, or use the default name.
2. Select the port mapping mode to Auto.
3. Click Save.
Enable the UPnP™ function on the router at the same time.
Set Manual Port Mapping
Steps
1. Check Enable UPnP™, and choose a friendly name for the device, or use the default name.
2. Select the port mapping mode to Manual, and set the external port to be the same as the internal port.
3. Click Save.