User Manual

iDS-2CD7xxG0-xxxxx Network Bullet Camera User Manual
UM iDS-2CD7xxG0-xxxxx 021021NA 36
2. Set the Record File Size and saving path to for recorded files.
3. Click Save.
4. Click to start recording. Click to stop recording.
Set Lite Storage
After lite storage is enabled, the video stream frame rate and bitrate can be reduced to lengthen the
storage time of the memory card when there is no moving object in the monitoring scenario.
Steps
1. Go to Configuration → Storage → Storage Management → Lite Storage.
2. Check Enable and set the level. The higher the level, the larger the frame rate and bitrate, and the
shorter the recommended storage time.
3. Set the storage time. The device automatically calculates the bitrate and offers the recommended
storage time according to the memory card space and level. You are recommended to set the storage
time to the device recommended time.
If lite storage is enabled, an unformatted memory card will be formatted automatically.
The displayed available space of the memory card is assigned by default according to
Percentage of Record in Storage → Storage Management → Quota. You can adjust it as
required.
Only certain device models support this function.
Playback and Download Video
You can search, playback, and download the videos stored in the local storage or network storage.
Steps
1. Click Playback.
2. Set search condition and click Search. Matching video files show on the timing bar.
3. Click
to play the video files.
Click to clip video files.
Click to play video files in full screen. Press ESC to exit full screen.
Go to Configuration → Local, click Save clips to to change the saving path of clipped video
files.
4. Click on the playback interface to download files.
1) Set search condition, and click Search.