User Manual
Table Of Contents
- Legal Information
- About this Manual
- Trademarks
- Disclaimer
- Symbol Conventions
- Safety Instruction
- Contents
- Chapter 1 System Requirements
- Chapter 2 Device Activation and Accessing
- Illegal Login Lock
- Chapter 3 Live View
- 3
- 3.1 Live View Parameters
- 3.1.1 Enable and Disable Live View
- 3.1.2 Adjust Aspect Ratio
- 3.1.3 Live View Stream Type
- 3.1.4 Select Third-Party Plug-in
- 3.1.5 Window Division
- 3.1.6 Light
- 3.1.7 Count Pixel
- 3.1.8 Start Digital Zoom
- 3.1.9 Auxiliary Focus
- 3.1.10 Lens Initialization
- 3.1.11 Quick Set Live View
- 3.1.12 Lens Parameters Adjustment
- 3.1.13 Conduct 3D Positioning
- 3.2 Set Transmission Parameters
- 3.3 Set Smooth Streaming
- Chapter 4 Video and Audio
- Chapter 5 Video Recording and Picture Capture
- Chapter 6 Events and Alarms
- 6
- 6.1 Basic Event
- 6.2 Smart Event
- 6.2.1 Detect Audio Exception
- 6.2.2 Set Defocus Detection
- 6.2.3 Detect Scene Change
- 6.2.4 Set Face Detection
- 6.2.5 Set Video Loss
- 6.2.6 Set Intrusion Detection
- 6.2.7 Set Line Crossing Detection
- 6.2.8 Set Region Entrance Detection
- 6.2.9 Set Region Exiting Detection
- 6.2.10 Set Unattended Baggage Detection
- 6.2.11 Set Object Removal Detection
- 6.2.12 Draw Area
- 6.2.13 Set Size Filter
- Chapter 7 Network Settings
- Chapter 8 Arming Schedule and Alarm Linkage
- Chapter 9 System and Security
- 9
- 9.1 View Device Information
- 9.2 Search and Manage Log
- 9.3 Simultaneous Login
- 9.4 Import and Export Configuration File
- 9.5 Export Diagnose Information
- 9.6 Reboot
- 9.7 Restore and Default
- 9.8 Upgrade
- 9.9 View Open Source Software License
- 9.10 Time and Date
- 9.11 Set RS-485
- 9.12 Set RS-232
- 9.13 External Device
- 9.14 Security
- 9.15 Certificate Management
- 9.16 User and Account
- Chapter 10 Allocate VCA Resource
- Chapter 11 Open Platform
- Chapter 12 Set EPTZ
- Chapter 13 Smart Display
- Appendix A: Device Command
- Appendix B: Device Communication Matrix
iDS-2CD7xxG0-xxxxx Network Bullet Camera User Manual
UM iDS-2CD7xxG0-xxxxx 021021NA 16
Lens initialization is used on devices equipped with a motorized lens. The function can reset the lens
when long time zoom or focus results in blurred image. This function varies by model.
• Manual Lens Initialization: Click to operate lens initialization.
• Auto Lens Initialization: Go to Configuration → System → Maintenance → Lens Correction to enable this
function. You can set the arming schedule, and the device will correct the lens automatically during
the configured time periods.
Quick Set Live View
Offers quick setup of PTZ, display settings, OSD, video/audio, and VCA resource settings on live view page.
Steps
1. Click to show quick setup page.
2. Set PTZ, display settings, OSD, video/audio, and VCA resource parameters.
• For PTZ settings, see Lens Parameters Adjustment.
• For display settings, see Display Settings.
• For OSD settings, see OSD.
• For audio and video settings, see Video and Audio.
• For VCA settings, see Allocate VCA Resource.
This function is supported only by certain models.
Lens Parameters Adjustment
It is used to adjust the lens focus, zoom, and iris.
• Zoom
Click , and the lens zooms in.
Click , and the lens zooms out.
• Focus
Click , then the lens focuses far and the distant object gets clear.
Click , then the lens focuses near and the nearby object gets clear.
• PTZ Speed
Slide to adjust the speed of the pan/tilt movement.
• Iris