Spec Sheet

© 2021 Hikvision USA Inc. • All Rights Reserved • Specifications subject to change without notice.
Hikvision USA Inc., 18639 Railroad Street, City of Industry, CA 91748, USA • Hikvision Canada, 4848 rue Levy, St-Laurent, Quebec, Canada, H4R 2P1
Tel: [phone] • Toll Free in USA: [phone] • E-Mail: [e-mail] • www.hikvision.com 102021NA 
Specifications (continued)
iDS-2CD7046G0-AP
Image
Smart IR
IR LEDs on camera should support Smart IR function to automatically adjust power to avoid image
overexposure
Day/Night Switch
Day/Night/Auto/Schedule/Triggered by Alarm In
Target Cropping
Yes
Picture Overlay
Logo picture can be overlaid on video with 128 × 128 24-bit bmp format
Image Enhancement
BLC, HLC, 3D DNR, Defog, EIS, Distortion Correction
Image Parameters Switch
Yes
Image Settings
Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance adjustable by client
software or Web browser
SNR
≥52 dB
Interface
Alarm
2 inputs, 2 outputs (maximum 24 VDC, 1A)
Audio
1 input (line in), 1 output (line out), 3.5 mm connector, 2 channels, 1 built-in microphone
RS-485
1 RS-485 (half duplex, HIKVISION, Pelco-P, Pelco-D, self-adaptive)
Video Output
1 Vp-p Composite Output (75 Ω/CVBS) (for debugging only)
On-Board Storage
Built-in microSD/SDHC/SDXC slot, up to 256 GB
Hardware Reset
Yes
Communication Interface
1 RJ-45 100M/1000M self-adaptive Ethernet port
Power Output
12 VDC, maximum 200 mA (supported by all power supply types)
Smart Feature-Set
Basic Event
Motion detection, video tampering alarm, exception (network disconnected, IP address conflict, illegal
login, HDD full, HDD error)
Smart Event
Line crossing detection, up to 4 lines configurable Intrusion detection, up to 4 regions configurable
Region entrance detection, up to 4 regions configurable region exiting detection, up to 4 regions
configurable, unattended baggage detection, up to 4 regions configurable object removal detection,
up to 4 regions configurable, scene change detection, audio exception detection, defocus detection
Counting
Yes
Intelligent (Deep Learning Algorithm)
Multi-Target Detection
Simultaneous detection of human body and face, gets 8 face features and 13 human body features
Attribute-based People Counting
Supports entering/exiting counting (track 30 targets simultaneously); identifies people who pass
repeatedly over a period of time
Hard Hat Detection
Detects up to 30 human targets simultaneously; supports up to 4 shield regions
Queue Management
Detects queuing-up people number and waiting time of each person, Generates reports to compare
the efficiency of different queuing-ups and display the changing status of one queue,
raw data export
for further analysis
Premier Protection
Line crossing, intrusion, region entrance, region exiting, alarm trigger by specified target types (human
and vehicle), filter out mistaken alarm caused by target types such as leaf, light, animal, flag, etc.
General
Linkage Method
Upload to FTP/NAS/memory card, notify surveillance center, send e-mail, trigger alarm output, trigger
recording, trigger capture Trigger recording：memory card, network storage, pre-record and post-
record Trigger captured pictures uploading: FTP, SFTP, HTTP, NAS, Email Trigger notification: HTTP,
ISAPI, alarm output, Email
Online Upgrade
Yes
Dual Backup
Yes
Web Client Language
33 languages: English, Russian, Estonian, Bulgarian, Hungarian, Greek, German, Italian, Czech, Slovak,
French, Polish, Dutch, Portuguese, Spanish, Romanian, Danish, Swedish, Norwegian, Finnish, Croatian,
Slovenian, Serbian, Turkish, Korean, Traditional Chinese, Thai, Vietnamese, Japanese, Latvian,
Lithuanian, Portuguese (Brazil), Ukrainian
General Functions
Anti-flicker, 5 streams, up to 5 custom streams, EPTZ, heartbeat, mirror, privacy masks, flash log,
password reset via e-mail, pixel counter
Software Reset
Yes
Sustainability
Yes
Storage Conditions
-30° to 60° C (-22° to 140° F), humidity 95% or less (non-condensing)
Startup and Operating Conditions
-30° to 60° C (-22° to 140° F), humidity 95% or less (non-condensing)
Power Supply
12 VDC ±24.9%, two-core terminal block, reverse polarity protection; 24 VAC ±24.9%; PoE: 802.3af, Type
1 Class 3
Power Consumption and Current
W/extra load: 12 VDC, 1A,24 VAC, 0.79A, 50/60 Hz, 12 W; PoE (802.3af, 36–57 VDC), 0.34–0.21A, class 3
Power Interface
Two-core terminal block
Camera Material
Aluminum alloy body
Camera Dimension
142.5 mm × 69.8 mm × 68 mm (5.61" × 2.75" × 2.68")
Package Dimension
315 mm × 140 mm × 140 mm (12.4" × 5.51" × 5.51")
Camera Weight
730 g (1.96 lb)
With Package Weight
1115 g (2.99 lb)
Metadata
Metadata
Intrusion detection, line crossing detection, region entrance detection, region exiting detection,
unattended baggage detection, object removal, face capture and queue management are supported