Quick Start Guide
Manuals
Brands
Hikvision Manuals
Box Cameras
4 Megapixel Box Network Camera
12
13
14
15
16
17
18
19
20
21
Table Of Contents
Quick Start Guide
About this Manual
Trademarks
Disclaimer
Regulatory Information FCC Information
FCC Conditions
EU Conformity Statement
Industry Canada ICES-003 Compliance
Safety Instruction
Warnings
Cautions
Table of Contents
1 Appearance Description
NOTE: Power indicator: red stands for starting and blue for working.
To reset the camera default parameters, press and hold the RESET button and power on the camera. After the camera powers on, continue to press and hold the Reset button for 10 seconds.
ABF is supported by certain camera models.
2 Installation
Before You Start
2.1 Memory Card Installation
Steps
2.2 Lens Installation
Before You Start
Steps:
NOTES:
2.3 Camera Mounting
2.1
2.2
2.3
2.3.1 Pendent Mounting
Before You Start
Steps
2.3.2 Wall Mounting
Before You Start
Steps
2.4 Mounting with Housing
Before You Start
2.3.3 Mounting Type I Housing
Steps
NOTE: Push the camera as close to the window as possible.
2.3.4 Mounting Type II Housing
Steps
2.5 Zoom and Focus Adjustment
Steps
NOTE: For a camera equipped with auto iris, it is suggested you change the iris mode to manual from the camera menu (accessed via Web browser), and re-change it back to auto iris after you adjust the focus by the focus lever.
3 Activate and Access Network Camera
iDS-2CD7046G0-
AP Network Box Camera Qu
ick Start Guide
QSG
iDS
-2CD7046G0-
AP 022321NA
21
1
...
...
19
20
21
