DS-2CV2G21G0-IDW Network Bullet Camera Quick Start Guide 0
Network Bullet Camera·Quick Start Guide © 2019 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (http://www.
Network Bullet Camera·Quick Start Guide AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
Network Bullet Camera·Quick Start Guide IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Network Bullet Camera·Quick Start Guide FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
Network Bullet Camera·Quick Start Guide supplier or to a designated collection point. For more information see: www.recyclethis.info. Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements. This device complies with Industry Canada licence-exempt RSS standard(s).
Network Bullet Camera·Quick Start Guide fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.
Network Bullet Camera·Quick Start Guide Warnings Follow these safeguards to prevent serious injury or death. Cautions Follow these precautions to prevent potential injury or material damage. Warnings ● For device with this sticker, this device is intended for installation in a restricted access location, access can only be gained by service persons or by users who have been instructed about the reasons for the restrictions applied to the location and about any precautions that shall be taken.
Network Bullet Camera·Quick Start Guide ● If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center. Cautions ● Make sure the power supply voltage is correct before using the camera. ● Do not drop the camera or subject it to physical shock. ● Do not touch sensor modules with fingers. If cleaning is necessary, use clean cloth with a bit of ethanol and wipe it gently.
Network Bullet Camera·Quick Start Guide ● While in delivery, the camera shall be packed in its original packing, or packing of the same texture. ● Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment shall be replaced regularly according to their average enduring time. The average time varies because of differences between operating environment and using history, so regular checking is recommended for all the users. Please contact with your dealer for more details.
Network Bullet Camera·Quick Start Guide Table of Contents 1 Appearance Description ............................................................ 11 1.1 Type I Camera Overview ................................................... 11 1.2 Type II Camera Overview .................................................. 12 1.3 Type III Camera Overview ................................................. 14 2 Installation ...............................................................................
Network Bullet Camera·Quick Start Guide 1 Appearance Description The camera series has three appearance types: 1.1 Type I Camera Overview 2 1 4 3 4 1 3 5 6 7 8 9 Type I Bullet Camera Overview Description No.
Network Bullet Camera·Quick Start Guide No. Description 4 Micro USB Interface 5 Camera Body 6 Bracket 7 Microphone 8 Lens 9 Status Indicator 1.
Network Bullet Camera·Quick Start Guide No.
Network Bullet Camera·Quick Start Guide 1.3 Type III Camera Overview 2 1 1 4 3 4 3 5 6 7 8 9 10 Type III Bullet Camera Overview Description No.
Network Bullet Camera·Quick Start Guide No. Description 5 Camera Body 6 Bracket 7 Microphone 8 Lens 9 Status Indicator 10 Alarm Indicator Note: Press and hold the reset button about 10s when the camera is powering on or rebooting to restore the default settings, including the user name, password, IP address, port No., etc.
Network Bullet Camera·Quick Start Guide 2 Installation Before you start: ● Make sure the device in the package is in good condition and all the assembly parts are included. ● The standard power supply is 5 VDC. Please make sure your power supply matches with your camera. ● Make sure all the related equipment is power-off during the installation. ● Check the specification of the products for the installation environment.
Network Bullet Camera·Quick Start Guide Memory Card Figure 2-1 Find Memory Card Cover 2. Open the cover and insert memory card into slot. 3. Close the cover. Wall Mounting Steps: 1. Paste the drill template (supplied) to the desired mounting position on the wall. 2. Drill two Ø6 mm holes with the depth of 25 mm to 30 mm according to the supplied drill template.
Network Bullet Camera·Quick Start Guide Figure 2-2 Drill Two Holes on the Wall Note: You can drill the holes without drill template. Make sure that the distance between two holes is 20 mm. 3. Insert expansion bolts in the holes. 4. Align the holes of base holder with two holes on the wall and drill self-tapping screws in expansion bolts through the base holder to fix the holder on the wall.
Network Bullet Camera·Quick Start Guide 5. Align the hook on the base holder with the slot on the device base and insert the hook in the slot. 6. Slide down the device to fix the device on the holder. Figure 2-4 Fix the Device on the Wall 7. Connect to power via Micro USB Interface. 8. Adjust the surveillance angle by rotating two ends of the bracket. Adjust two ends of the bracket to adjust the angle of the device.
Network Bullet Camera·Quick Start Guide R: 0° to 360° R: 0° to 360° T: -75° to 25° P: -25° to 25° T & P: -25° to 25° Figure 2-5 3-aix Adjustment Wall Mounting with Tape Before you start: 3M tape can be fixed on the surface of wood, glass, metal. Surface which is too smooth, coated, or rough cannot be fixed with tape. Steps: 1. Stick the supplied double-sided tape on the device base.
Network Bullet Camera·Quick Start Guide Tape Figure 2-6 Stick Double-Sided Tape on the Device Base 2. Clean the mounting position on the wall. 3. Remove the adhesive release paper of tape. 4. Put the device on the desired mounting position on the wall and press it for 10 seconds. 5. Repeat Step 7 and 8 of Section 2.2 Wall Mounting to complete the installation.
Network Bullet Camera·Quick Start Guide 3 Activate and Access Network Camera Scan the QR code to get Activate and Visit Network Camera. Note that mobile data charges may apply if Wi-Fi is unavailable.
0 UD16780B-A
