Quick Start Guide

Network Dome Camera·Quick Start Guide
18
Steps:
1. Install the bracket to the ceiling with the self-tapping screws.
Figure 2-5 Secure the Bracket
2. Secure the adapter to the bracket with screws.
Figure 2-6 Secure the Adapter
3. If you need to route cables through the ceiling, cut a cable hole on
the ceiling. Skip this step if you want to route the cables on the
surface of the ceiling.
4. Route the cables of the camera.
5. Hold the bottom base and rotate the camera according to the
marked direction on the adapter plate until it clicks into place.