Quick Start Guide
Table Of Contents
Network Dome Camera·Quick Start Guide
21
Insert the waterproof rubber gasket ⑤ into the waterproof 5)
endcap ④, and secure lock nut ⑥ with the waterproof
endcap ④.
Align the snap on the waterproof endcap ④ with the notch on 6)
the camera’s network interface socket ①, and then secure the
waterproof endcap ④ to the camera’s network interface
socket ① to finish installation.
Camera
Switch/Router
Align the snap and notch.
i. Insert ⑤ into ④.
ii. Secure
⑥ with ④.
Figure 2-9 Water-proof Accessory Installation