Quick Start Guide

Network Dome Camera·Quick Start Guide
12
Table 1-1 Description
No.
Description
1
Bubble
2
Lens
3
IR LED
4
Wi-Fi Antenna
5
Black Liner
6
Safety Rope
7
Lens Adjusting Bracket
8
WPS (Wi-Fi Protected Setup)/Reset Button
9
Bottom Base
10
Mic
11
Power Interface
12
RJ45 Network Interface
13
Adapter Plate
Note:
● Hold RESET about 10s when the camera is powering on or
rebooting to restore the default settings, including the user
name, password, IP address, port No., etc.
● A wireless router with the WPS function is required to enable
the WPS function of the camera. Refer the steps below.