Quick Start Guide

Network Bullet Camera·Quick Start Guide
14
No.
Description
12
Status Indicator
● Flashing Blue: Normal Wi-Fi connection.
● Solid Red: The camera is during startup.
● Flashing red and blue: The camera has
started and starts Wi-Fi configuration.
● Flashing Red:
● Fast Flashing: The network connection
failed.
● Slow Flashing: Memory card error or
other problems.
13
Mic
Note:
● For type II and III camera, only certain models support the
memory card installation.
● Hold RESET about 10s when the camera is powering on or
rebooting to restore the default settings, including the user
name, password, IP address, port No., etc.
● A wireless router with the WPS function is required to enable
the WPS function of the camera. Refer to the steps below.
Steps:
Press the WPS button on the router.
Press the WPS button (about 2s) on the camera within 120s
you enable the WPS of the router to join in the wireless
network.