Product Info

Steps
1.
Hold to show the menu of device.
2.
Select , and press . You can view the device informaon
such as version, and serial No.
9.2 Upgrade Device
Before You Start
Please g
et the upgrade package rst.
Steps
1.
Connect the device to your PC with USB cable.
2.
Open the detected disk, copy the upgrade le and paste it to
the r
oot directory of the device.
3.
Disconnect the device from your PC.
4.
Reboot the device.
Result
The device upgrades
automacally. The upgrading process will be
displayed in the main interface.
9.3 Restore Device
Steps
1.
Hold
to show the menu of device.
2.
Select , and press to restore the device to defaults
acc
ording to the prompt.
10 Frequently Asked Quesons
10.1 Why does the charge indicator ash
improperly?
Check the following items.
1.
Check whether the device is charged with standard power
adapter and the charging temperature is above 0 °C (32 °F).
2. The device is equipped with built-in charging protecon
module. Charge the device in power o status.
10.2 Why is the monitor o?
Check whether the device is o-baery.
Check the monitor aer
charging the device for 5 minutes.
10.3 The image is not clear, how to adjust it?
Adjust the diopter adjustment knob unl the image is clear. Refer
t
o secon .
10.4 Capturing or recording fails. What's the
problem?
Check the following items.
•
Whe
ther the device is connected to your PC. Capturing or
recording is disabled in this status.
•
Whether the storage space is full.
•
Whether the device is low-baery.
11