User Manual

ERT-F2xx DVR User Manual
UM ERT-F2xx 030118NA 97
Chapter 9 Network Settings
Configuring General Settings 9.1
Purpose:
Network settings must be properly configured before you operate the DVR over a network.
Go to M
enu > Configuration > Network > General. 1.
Network Settings Figure 9-1
Configure the following settings: Working Mode, NIC Type, IPv4 Address, IPv4 Gateway, MTU, and DNS 2.
Server.
If the DHCP server is available, you can click the DHCP checkbox to automatically obtain an IP address and 3.
other network settings from that server.
The valid value range of MTU is 500 to 9676.
Click Apply. 4.
Configuring Advanced Settings 9.2
Configuring Hik-Connect 9.2.1
Purpose
Hik-Connect enables the mobile phone app and the service platform page (www.hik-connect.com) to access
and manage your connected DVR, providing convenient remote access to the surveillance system.